View Cart / Checkout
0 items in your cart
Your total is $0.00
Home Products Email us for Catalog or Inquiries Order Form Terms & Conditions Shipping Rates

Search our site:



Power Supplies, Chargers & Wall Transformers

<< Prev      Currently viewing page 1 of 1      Next >>
Page: 1




   
 
click to view full size image PP-6224A/U   -   * The PP-6224 power supply allows using vehicular equipment at fixed or airborne locations where AC power is available This is a portable power supply that has two outputs that can supply "24 Volt" power at up to 25 Amps total. It's input can be either AC (115 or 230 VAC & 50, 60 or 400 Hz) or a "24 Volt" battery with automatic switchover to the battery if the AC fails. (H2C,L1X) Used Checked comes with U-383 connector for you to wire to your own power cord.
$250.00 each


   
 
click to view full size image JFS0750   -   Lambda 20-29 Volt 31.2 Amp Switching (Closed Frame)Power Supply Only One Available Unused
$495.00 each
   
 
VA24H1500M   -   Acopian 24 Volt 15 Amp Power Supply (Q2K)
$225.00 each
   
 
click to view full size image PP-1097B   -   300 Watt DC Power Supply, Input 115 VAC, 60 Hz, Output 6, 12, 24 VDC. AC Variac controls DC output. 12.5 Amps @ 24VDC, 25 Amps @ 12VDC, 50 AMPS @ 6 VDC. Rough Exterior Condition. Used Reparable.
$150.00 each
   
 
click to view full size image LXS-EE-15-R   -   Lambda 15 Volt 28 Amp Power Supply Only One Available Used
$150.00 each
   
 
click to view full size image LXS-EE-28-R-5193-1   -   Lambda 30 Volt 10 Amp Power Supply Only Two Available. (S1L) Unused.
$95.00 each


   
 
click to view full size image NCR-5   -   Industrial Power Supply made for National Cash Register, rated 12 volts at 5 amps. These power supplies will easily provide up to 10 amps under normal ham radio usage. 10" x 7" x 16", 35 lbs shipping. (R1M) Used Checked.
$50.00 each
   
 
click to view full size image NCR-15   -   Industrial Power Supply made for National Cash Register, rated 12 volts at 15 amps. These power supplies will easily provide up to 25 amps under normal ham radio usage. 13" x 7" x 16", 60 lbs shipping. (R1M) Used Checked.
$100.00 each
   
 
click to view full size image NCR-25   -   Industrial Power Supply made for National Cash Register, rated 12 volts at 25 amps. These power supplies will easily provide up to 45 amps under normal ham radio usage. 19" x 7" x 16", 70 lbs shipping. (R1M) Used Checked.
$175.00 each


   
 
click to view full size image PS1303U   -   Power Supply 13.8 Volts 3 Amps (5A peak). Current-limiting. Fuse-protected. Metal housing. 100mV ripple voltage. 4 5/16" x 5" x 2 3/4", 6 lbs sh.
$58.50 each
   
 
click to view full size image PS1503SBU   -   Lab Power Supply 0-15VDC / 0-3A. LCD display with backlight for voltage and current. Adjustment of voltage and current. Fuse-protected. Output connectors: IEC1010. 1mv ripple voltage. 8 7/16" x 6 3/64" x 3 3/4" 10 lbs sh. Drop shipped from Texas.
$82.50 each
   
 
click to view full size image PS23003AU   -   Dual Output Lab Power Supply 2 x 0-30V / 2 x 0-3A. Analog meters for voltage and current. Current-limiting. Fuse-protected. Output connectors: IEC1010. 1mv ripple voltage. 5ma ripple current. Drop shipped from Texas. 13" x 7.88" x 6.11", 24 lbs sh. List Price, $235.90; Our Price,
$159.95 each


   
 
click to view full size image LAB1U   -   3-in-1 Lab Unit, Multimeter, Power supply, and Soldering Iron. DIGITAL MULTIMETER - 3 1/2 backlit LCD, Automatic polarity indication, DC voltage: 200mV to 600V in 5 steps, AC voltage: 200V and 600V, DC current: 200µA to 10A in 5 steps, Resistance: 200 ohm to 2Mohm, Diode, Transistor and Continuity Test, Data-hold function and buzzer. REGULATED POWER SUPPLY - Selectable output voltages: 3 - 4.5 - 6 - 7.5 - 9 - 12Vdc, Output current: 1.5A (2A peak), LED overload indication, Output on/off switch, Very low ripple, LED power indication. SOLDERING STATION - Low-voltage iron: 24V, Ceramic 48W heating element with temperature sensor, Temperature range: OFF - 150 - 450C, Lead-free soldering possible, Supplied w/ sponge and spare bit. Great space saver! Drop shipped from Texas. List Price, $193.40; Our Price,
$132.94 each


   
 
click to view full size image PSDC20   -   24VDC TO 12VDC 20 AMP CONVERTER. Compact design for in-car use. Input 24VDC. Output 12VDC. Maximum current 20 amps, 1 min; 7 Amps continuous. Banana plugs. Fuse protected. New, List Price, $79.90; Our Price,
$69.99 each
   
 
click to view full size image PSDC05   -   24VDC TO 12VDC CONVERTER 5A. Compact design for in-car use. Input voltage: 20-30Vdc. Output voltage: 12Vdc. Max. current: 5A. Cigarette lighter plugs. Fuse-protected. New,
$23.95 each


Acopian Gold Box Series Power Supplies - Fully enclosed with terminals for wire connection. Perforated covers. Each unit is linear regulated and requires 105-125VAC 50-400Hz. Removed from lightly used equipment. Nice & clean.



   
 
A2NT220   -   2V 2.2A, Acopian Supply, (Q2K)
$17.50 each
   
 
A2MT600   -   2V 6.0A, Acopian Supply, only one left (Q2K)
$27.00 each
   
 
A2MT1200   -   2V 12.0A, Acopian Supply, (Q2K)
$34.00 each
   
 
VTD15-160   -   ±15V 1.6A, Dual Track Acopian Supply,
$69.00 each
   
 
VTD5-250   -   ±10V 2.5A, Dual Tracking Acopian Supply,
$34.00 each
   
 
VRB5G500   -   5V 5.0A, Acopian Supply,
$27.00 each
   
 
click to view full size image VA5MT510   -   5V 5.1A, Acopian Supply, (Q2K)
$27.00 each
   
 
VA5MT600   -   5V 6A, Acopian Supply, (Q2K)
$27.00 each
   
 
3V51212T9   -   Triple Output Acopian Power Supply. 5 VDC 6 Amps, 12 VDC 1.2 Amps, 12 VDC 1.2 Amps.
$35.00 each
   
 
VA5MT1200   -   5VDC 12A, Acopian Supply, (Q2K)
$46.00 each
   
 
VA5H1700   -   5V 17A, Acopian Supply, (Q2K)
$40.00 each
   
 
VA5H2200   -   5V 22A, Acopian Supply, (P2U)
$46.00 each
   
 
VA12MT650   -   12V 6A, Acopian Supply,
$95.00 each
   
 
VTD15-40   -   ±15V 400 MA, Dual Tracking Acopian Supply,
$46.00 each
   
 
VFD15-50   -   ±15V 500MA, Dual Tracking Acopian Supply,
$46.00 each
   
 
A15NT200   -   15V 2A, Acopian Supply, (Q2K)
$64.00 each
   
 
VA15NT200   -   15V 2A, Acopian Supply, (Q2K)
$75.00 each
   
 
VTD15-250   -   ±15V 2.5A, Dual Tracking Acopian Supply,
$110.00 each
   
 
VRB15G300   -   15v 3.0A, Acopian Supply,
$99.50 each
   
 
VTD15-450   -   ±15V 4.5A, Dual Tracking Acopian Supply,
$129.00 each
   
 
RB24G210   -   24V 2.1A, Acopian Supply, (Q2K)
$45.00 each
   
 
VA050MX120   -   0-50V 1.2A, Acopian Supply, only one in stock.
$58.00 each
   
 
A0100MX10   -   0-100V 100ma, Acopian Supply, (Q2K)
$95.00 each
   
 
B200GT10   -   200v 100ma, Acopian Supply,
$167.00 each


   
 
click to view full size image WE-65   -   Rackmount Lamp Power Supply by Westinghouse covering 12 to 65VDC at 3 to 9.5 amps from an input of 115/230VAC 60Hz. The power supply does have a current adjust but does NOT have a voltage adjust. The voltage is directly relative to what the current is set at. Has 2.9"H x 3.5"W panel meters for Amps and Volts. Running time indicator. 15.5x19x7, 49 lbs sh. Used,
$159.50 each


   
 
click to view full size image DCR40-13B   -   Sorensen DCR40-13B Rackmount Power Supply 0 to 40 V @ 13 A. Low-level remote sensing, manual & automatic control, direct & master-slave paralleling & series operation. Low ripple and noise. Fine/coarse adjustments for current and voltage. Large analog current and voltage meters Power required 115 V 50/60 hz, 19x21x3.5, 48 lbs sh. Used Checked,
$375.00 each




   
 
click to view full size image K1823   -   1A POWER SUPPLY KIT ADJUSTABLE 1.5 TO 35 VOLTS. This small power supply provides a regulated voltage, adjustable between 1.5 and 35 volts at 1 Amp. With the LM317 regulator remarkably better ripple and regulation characteristics are given than with conventional regulators. Current limiter and thermal overload protection are included in the IC. Supplied without heatsink. Output current: 1.5A max. Max. dissipation: 15W (cooled). Max. input voltage: 40V DC. PCB dimensions : 2.1" x 2.1". New,
$13.90 each


   
 
click to view full size image SPS-2678   -   Large High Current Power Supply. Has five internal modules: 3 each 5V 70A SPS-2599, +18V 70A SPS-2679, & -18V 70A SPS-2680 Power input 208VAC. Made by Trasistor Devices. 19x22.5x10.5, 110 lbs sh. (C9O) Used good condition reparable,
$175.00 each
   
 
SPS-2691   -   Large High Current Power Supply. Has three internal modules: 3 each 5Volt SPS-2688, no output current data bu fairly heavy. Power input 48VDC. Made by Trasistor Devices. 19x22.5x10.5, 110 lbs sh. Used reparable,
$75.00 each
   
 
click to view full size image HV-G-5-OVM   -   5 VDC 100 Amps Regulated Rackmount Power Supply, Panel Meters 0-6V and 0-150A. Minimal adjustment on volts and amps. Fused. Requires 105-125CAC 60 Hz. 19x18.5x5.3, 107 lbs sh. Used Operational,
$99.50 each
   
 
click to view full size image Z5TX10-1   -   Abbott Transistor Laboratories, 5 Volt 10 Amp Switching power supply. 6"x4"x2.25" 4 Lbs (K1Y,L2U) Unused.
$15.00 each
   
 
click to view full size image 1001932   -   5VDC 10 amps, +15VDC 0.7 amp, -15VDC 0.7 amp Power Supply by Power One. Primary 115/230VAC 60Hz. On/Off Switch. Fused. 16x4.5x2.6, 11 lbs sh. Used,
$15.95 each
   
 
click to view full size image HF-75064   -   Power Supply with outputs of +5VDC 16.5A, +12VDC 3.5A, -12VDC 1A. Inputs 100-240VAC 50-60Hz. Made by Acme Electric. 10.2x5.8 x2.5, 7 lbs sh. Used,
$19.99 each
   
 
click to view full size image PS-1545   -   EXELON DC REGULATED SUPPLY, 5 VDC 3 amp and 12 VDC 0.1 amp output from 115/230 VAC 47-63 Hz input. "L"-mount; 5x5.3x2.8, 4 lbs. (K2U) Unused,
$14.00 each
   
 
COL72559   -   COLECO DISK DRIVE POWER SUPPLY for ADAM system; transformer type with outputs +5 V 3 amp, +12 V 2.9 A, -5 V 200 ma, and +18 V inductive 1 A. 115 V 60 Hz input. With cords and On-Off switch. 11x4x8, 10 lbs sh. unused,
$12.00 each
   
 
click to view full size image 10-4131-045   -   12 VDC 1.5 AMP DC POWER SUPPLY, Adjustable +/- 2.25 volts. Requires 115 VAC 60 Hz; Mfg by ACDC Electronics. 4.9x6.3x3.4, 7 lbs sh. (M1Y,N2L) Unused,
$23.00 each
   
 
click to view full size image UADP-A044WJPZ   -   Sharp AC Power Supply/Adapter. Input: 110-240V 50/60 Hz 75W. Output: 12V 5A. Please take note, 2 wire AC power cord not included and original output connector has been cutoff. (M1Y) Used.
$9.99 each
   
 
click to view full size image 01-302344   -   12VDC 13 Amps Regulated Power Supply by Standard Power. Requires 115/220/230VAC 47-440Hz. 13.4x4.7 x4.8, 19 lbs sh. (C2Q) Unused,
$45.00 each
   
 
click to view full size image DR-12VPS   -   DC POWER SUPPLY designed for small tool rated 12 VDC @ 1.5 amp under inductive load like a motor. Output over 20 VDC under lesser loads; can be varied somewhat depending on load. Includes 6 ft AC cord; requires 115 VAC 60 Hz input; 2.5x2.5x5, 3 lbs sh. Unused,
$10.95 each
   
 
click to view full size image PAT-15-1.5   -   Kepco DC Power Supply, 0-15VDC, 0-1.5 Amps. Perforated housing. 6.3x4.9x3.3, 7 lbs sh.
$19.95 each
   
 
click to view full size image HCC15-3-A   -   Regulated Power Supply. 12VDC 3.4 amps or 15VDC 3 amps. Requires 115VAC 60Hz. Made by Power One. 9.4x4.9x3.2, (P1M,O2U) Used good condition,
$18.00 each
   
 
HD24-4.8-A   -   Regulated Power Supply. 24VDC 4.8 amps. Requires 115VAC 60Hz. Made by Power One. 9.4x4.9x3.2, (P1M) Unused,
$24.00 each
   
 
click to view full size image LXS-A-15-ZZ2   -   15VDC Regulated Power Supply Lambda LXS-A-15. Maximum Current at Ambient Temperature - 40 degree C at 2.4 amps, 50 degree C at 2.0 amps, 60 degree C at 1.6 amps, and 71 degree C at 1.3 amps. Requires 120VAC 60Hz. 8 lbs sh. Unused,
$35.00 each
   
 
click to view full size image LXS-CC-5-OV-R   -   Lambda 5 Volt 15 Amp Power Supply (N2K) Used
$49.50 each
   
 
click to view full size image 26859   -   Dressen-Barnes Electronics Corp. Regulated Open Frame Power Supply. 210-250 Volt 60 Hz Input. 20 VDC 3 Amp Output. (E2W) Unused.
$30.00 each
   
 
click to view full size image LM-CC20-V   -   Linear Regulated Power Supply by Lambda, adjustable 20VDC +/- 5% at 5 amps. Perforated housing. Requires 205-265VAC 55-65 Hz. 10x4.9x4.8, 17 lbs, Used,
$60.00 each
   
 
click to view full size image LRS-53-28   -   Regulated Power Supply by Lambda, adjustable 28VDC +/- 5% at 5 amps. Perforated housing. Requires 95-132VAC 47-63 Hz. 8.5x5x2.5, 5 lbs shipping, (S1M) Used,
$60.00 each
   
 
click to view full size image LRS-53-5-42163   -   Regulated Power Supply by Lambda, adjustable 5VDC +/- 5% at 5 amps. Perforated housing. Requires 95-132VAC 47-63 Hz. 8.5x5x2.5, 5 lbs shipping, (S1M) Used,
$60.00 each
   
 
click to view full size image LM-FA-20   -   Lambda Power Supply 19" Rack Mount 115 Volt 60 Hz input, 20 VDC 16 Amps Output (E2W) Unused. 50 Lbs Shipping.
$250.00 each
   
 
click to view full size image GLC110-24   -   GLC Series 110W Single Out 24 V Global Performance Commercial AC/DC Power Supply. (K1Y,O2K) Used.
$14.95 each
   
 
click to view full size image LOS-R-24   -   24VDC 8.3 Amps Regulated Power Supply by Lambda. Requires 115/220/230VAC 47-63Hz. 24x7x5, 22 lbs sh. (D2Q)
$65.00 each
   
 
click to view full size image B14L-5105-0178A   -   FUJITSU DENSO POWER SUPPLY, INPUT VOLTAGE 220/240 VAC 3.0 AMP 50/60 Hz AC 100/115/120 VAC 6 AMP 50/60 Hz AC. Output: +5 V DC @ 11 Amps, -12 V DC @ 5 Amps, +24 VDC @ 5 Amps. No Documentation. (P2K) Unused.
$75.00 each
   
 
click to view full size image BFS200-24   -   27.3VDC 7.5 Amp Elpac Power Supply. Input is 115VAC 60Hz. Not Regulated. 5x8x3.9, 15 lbs sh. (D2K)
$39.95 each
   
 
HP-6205B   -   Dual DC Supply 0-40V .3A, 0-20V .6A, used reparable,
$85.00 each
   
 
HP6438B-YY   -   HP6438B 0-60V 0-5A DC POWER SUPPLY, Used Reparable,
$295.00 each
   
 
HP6034A-YY   -   HP6034A SYSTEM POWER SUPPLY, 60 Volt 10 Amp, Used Reparable,
$275.00 each


   
 
click to view full size image 25A1   -   24VDC 11 amp output switching power supply which DOES WORK with the R-392 and GRC-106 Receiver / Exciter. Requires 115V or 230V 60Hz. Made by Acme Electric Corporation. 9.5x5x2.5, 6 lbs sh. (L1Y, H6E) Used,
$63.95 each
   
 
click to view full size image SX200-81605   -   Switching Power Supply , Outputs: 5VDC 20A, 15VDC 2.5A, -15VDC 1.0A, 24VDC 4.0A. Housing is perforated. Requires 115/230VAC 50/60 Hz. Xentek Inc mfg. 10.9x7x4.2, 7 lbs sh. (Q2U) Removed from used equipment
$12.00 each

4 / $39.95
   
 
click to view full size image A3060884   -   Switching Power Supply, Outputs: 5VDC 21A , -5.2VDC 7.5A, 12VDC 4.7A, -12VDC 1.5A. Each output has a potentiometer adjusting the voltage +/- 1 volt. Perforated housing with a heatsink on top. Requires 115VAC 60 Hz. Various mfg. 10.9 x 7 x 4.2, 15 lbs sh. (D3A,G9S) Unused,
$14.00 each

3 / $34.50
   
 
click to view full size image 12690   -   ENCLOSED SWITCHING POWER SUPPLY with 3" axial fan. Outputs +5 V 10 amp, +12 V regulated 2.5 A, +12 V 5 A Unregulated from 115 VAC 50/60 Hz input. P/o Wang equip. 2.6x5.1x12.5, 7#. Made by Astec. Used-clean,
$20.00 each
   
 
click to view full size image PS1558   -   POWER SYSTEMS SWITCHING SUPPLY, outputs +5 V 7 amps, +12 V 3 amps, -12 250 ma. -5 300 ma from 115/230 VAC 50-60 Hz input. 7.8x4.4x1.5, 3 lbs sh. Unused,
$21.00 each
   
 
click to view full size image SWPS-528   -   HEAVY DUTY SWITCHING SUPPLY, outputs +5 VDC 28 amps, +12 V 4 A, +24 V 1.5 A from 115 VAC 60 Hz in. W/ ON-OFF switch, & 16-pin Molex output connector. AS-IS complete, no schematic" 2x5x13, 6 lbs sh.
$10.95 each


   
 
MEND-REG-5V   -   POWER SUPPLY REGULATOR BOARD for supplies +5/-5 regulated 3 amp; up to 24 VDC unregulated. Capacitors two 15000 mf 15 V, 33000 mf 30 V. 2/KBPC rectifiers, two 2N6576, 2/2N4441 SCR. Regulators fixed sealed circuit boards are replaceable. 7.8x6x4; 3 lbs sh.
$7.00 each
   
 
SUN-REG-124   -   12V 4 amp REGULATOR MODULE from Sun supplies (pg 20), each with current limit and voltage adjust. Includes bridge rectifier, filter capacitor, two 2N3055 or equal and 723 regulator; 2 lbs. sh. No further info.
$14.00 each
   
 
click to view full size image SUN-REG-58   -   5 V 8 A with OVP. REGULATOR MODULE from Sun supplies (pg 20), each with current limit and voltage adjust. Includes bridge rectifier, filter capacitor, two 2N3055 or equal and 723 regulator; 2 lbs. sh. No further info.
$12.00 each


   
 
TXACA031   -   Qualcomm Wall Transformer, 4.1 Vdc, 550Ma, Used.
$1.50 each
   
 
click to view full size image CER-11.5V   -   CERVCO AC ADAPTER, 11.5 VAC 175 ma output; 6' cord w/o lugs.
2 / $4.00
   
 
AC-12-50   -   12 Vdc 50 Ma wallwart Used
$1.50 each
   
 
AC-12   -   12VDC 200 ma to 1000 ma, AC adapter / wall warts GRAB BAG from cell phones. Set of 5,
$11.00 each
   
 
AC-9   -   9VDC 130ma to 300ma, AC adapter / wall warts GRAB BAG from cell phones. Set of 6,
$12.00 each
   
 
AUR-95V34VA   -   Aurora Toy Wall Transformer, changes 120VAC to 9.5VDC 350ma output. 6' cord with slide lugs; 2 lbs sh.
2 / $5.25


   
 
click to view full size image NLN8858A   -   Motorola NLN8858 Radio Walkie Talkie Charging Station. Charges Key Variable Loader batteries as well as the Motorola MX-300 seies, MX-800 and STX radios. Output 10.6VDC 1600ma. Input 115VAC 60Hz 500 ma. 8.1x5.1x3.7, 7 lbs sh. (L2L) Unused,
$10.25 each


   
 
click to view full size image NTN4734A   -   Motorola NTN4734A Saber / Astro Battery Desktop Charger. Output 9.5VDC 1.5A. Requires 115 VAC 60Hz. It has been tested and is in good physical condition. With power cord. 6.5x7.6x3.3, 6 lbs sh. (K2L) Used,
$12.00 each
   
 
click to view full size image 4734A-NOCORD   -   Motorola NTN4734A Saber / Astro Battery Desktop Charger. Output 9.5VDC 1.5A. Requires 115 VAC 60Hz. It has been tested and is in good physical condition. 6.5x7.6x3.3, 6 lbs sh. LESS POWER CORD. (K2L) Used,
$10.00 each


   
 
GR-1264B-YY   -   General Radio 1264B Modulating Power Supply 200-300VDC 50mA 6.5VDC 1A, Used Reparable,
$150.00 each


   
 
413F1-YY   -   Collins 413 F-1 Power Supply, Used Reparable, (P1D)
$150.00 each


   
 
NH-57220-YY   -   NH Research 57220 2 Phase Power Source, (T1B) Used Reparable,
$195.00 each


   
 
click to view full size image PP-7286   -   Ni-Cad Battery Charger will charge 6, 12, 24, or 28 volt sealed Ni-Cad battery capable of either fitting in the five battery holders on the front panel or attached to cables connected to the five sets of plug-in-connectors (jacks) located beneath the battery holders. Unit originally designed for batteries BB-557, BB-699 and BB-704. Requires 115/230VAC 47 to 400Hz. 9.5x11.6x13, 38 lbs sh. Used,
$99.50 each
   
 
OM-PP-7286   -   PP-7286 Op's Manual Repro,
$10.00 each


   
 
click to view full size image PP-6241-U   -   SOLID-STATE BATTERY CHARGER for silver-zinc or nickel-cadmium types. Three independent charging units with outputs 8-16-32 VDC or 0-36 VDC in o.1 V steps; 1.0 or 2.25 amps charge. With cables CX11971, CX11972, and CX11973. Reguires 115 VAC 45-440 Hz input . 11.5x13.8x11, 46 lbs sh. With book, (A2M) Used,
$45.00 each
   
 
MM-PP-6241   -   PP-6241 Battery Charger Manual Repro,
$17.00 each


   
 
PP-86E   -   PP-86E/TXC-1 Power Supply. Used not checked,
$85.00 each


   
 
click to view full size image 80064   -   6130-01-113-7526, Power Supply Subassembly, Has a 6pin female, 4 pin male, and two U-228 (U-229 mate) connectors. 80064/ASSY 26962-A, MFR 97188/4129-AY1-C, Mfg by D-F Incorporated 3/92. We were not able to find any further information on this interesting power supply. 5.7x4.4x2.2, 6 lbs sh. Unused,
$99.00 each


   
 
click to view full size image K7300   -   UNIVERSAL BATTERY CHARGER / CONDITIONER KIT. (Recommended housing #G311) NiCd and NiMH batteries or different can be charged both quickly (52 minutes) and normally (14 hours). Usable battery voltages: 1.2V, 2.8V, 3.6V, 4.6V, 6V, 7.2V, 8.4V and 9.6V. Charge current: from 15mA to 750mA. Battery is fully discharged prior to charging and thus has a longer life. 3.4" x 3.1". Kit requires insertion & soldering of components! New,
$29.99 each
   
 
G311   -   Enclosure 4.5" x 3.5" x 2.2",
$10.20 each
   
 
SM-D-969142   -   Battery Charger Conditioner, accepts BB-490 style battery. (M1I) Used.
$75.00 each


   
 
click to view full size image GM-303   -   * General Microwave Model 303 Klystron Power Supply. Beam voltage variable from -250 to -400 VDC at 30 - 50 ma. Reflector voltage variable from 0 -to -900 volts at 10ua. 6.3VAC 1.5 amps. Reflector voltage internally modulated at 1000hz square wave adjustable up to 110 Volts peak to peak. External modulation via front panel terminal, 100,000 ohm impedance. Sinusoidal powerline frequency variable from 0 - 350 v P-P for reflector modulation. Power required 115VAC 50/60hz. Size 11.5 x 13 x 7.5 inches. 25 lbs sh. Ops manual repro, no schematic. (C2L) Unused,
$99.50 each
   
 
click to view full size image 07031-94545-325-1   -   Tempo Instruments Power Supply 120 Volt 60 Hz input, 325 Volt 100 Milliamp Output, Unused.
$45.00 each
   
 
click to view full size image 2K20   -   1-2000 VDC @ 20ma Adjustable Rack Mount Power Supply by Power Designs, Inc. Meter is for voltage and current with a toggle switch determining function. Requires 115VAC 60 Hz. 19x19x5, 29 lbs sh., (N2C) Used Checked,
$250.00 each
   
 
click to view full size image GE9T63Y2280G03   -   HIGH VOLTAGE POWER SUPPLY, input 120 VAC 60 Hz. DC outputs: -8000 V 0.25 to 1 ma, +120 V 15 ma, +24 V 1.25 amps, +16 V 450 ma. 4x9.5x4, 17 lbs sh. Some rust, has output. (I8I) Used,
$17.95 each
   
 
205A-10-YY   -   Bertran 10 KV HV Power Supply, Used Reparable,
$240.00 each
   
 
210A-05R   -   Bertran 5KV High Voltage Power Supply, Used Reparable,
$240.00 each
   
 
FLUKE-405B-YY   -   HV Power Supply, Used Reparable,
$295.00 each
   
 
GR-300V-YY   -   GR UNIT POWER SUPPLY 300V 50 MA, Used Reparable,
$45.00 each
   
 
GR-1263C   -   GENERAL RADIO AMPLITUDE REGULATED POWER SUPPLY, used reparable,
$75.00 each
   
 
HP6033A   -   HP6033A SYSTEM POWER SUPPLY, Used Reparable,
$275.00 each
   
 
HP-6522   -   HP 6522 HV Power Supply 2000 V 10 MA, Used Reparable,
$395.00 each
   
 
SF2276-YY   -   NH RESEARCH 2 PHASE SINE WAVE WHEEL SUPPLY, used reparable, (M1C)
$145.00 each
   
 
click to view full size image PS-141   -   * Hughes AML Klystron Power Supply for AMl-STX-141 Transmitter, Power input 95 - 130 VAC, Output -2200 VDC 130 ma and 6.3 vdc 1.3 amp current limited and adjustable. Meter monitors output voltage or current. 16 x 19 x 5.25, 37 lbs sh. (P2E) Used with info.
$50.00 each
   
 
MM-PP-638   -   Maintenance Manual PP-638 Original,
$12.00 each
   
 
KEPCO-1500   -   Kepco 1500 VDC 10 Ma Power Supply,
$95.00 each


   
 
SKL-381-YY   -   SKL-381 Power Supply w/4SKL 364 filter LP-HP, Used Reparable,
$295.00 each


   
 
LM-220-V   -   Lambda Power Supply 30-60 VDC output .7 Amps, 220 Volt Input. (T1L) Used.
$29.95 each
   
 
click to view full size image LM-B36   -   Lambda Power Supply 36 Volts 1 Amp
$45.00 each
   
 
click to view full size image 27091   -   Dressen-Barnes Electronics Corporation 220 Volt 60 Hz 3 Phase Input. 10 VDC 6 Amps, 50 VDC 3 Amp Output. 12x8x7, (E2W) Unused 55 Lbs Shipping.
$50.00 each
<< Prev      Currently viewing page 1 of 1      Next >>
Page: 1



Home Products Email us for Catalog or Inquiries Order Form Terms & Conditions Shipping Rates


Any problems with the website? Email webmaster@fairradio.com