View Cart / Checkout
0 items in your cart
Your total is $0.00
Home Products Email us for Catalog or Inquiries Order Form Terms & Conditions Shipping Rates

Search our site:



Motors

<< Prev      Currently viewing page 1 of 1      Next >>
Page: 1




AC MOTORS



   
 
click to view full size image S48K2A38A1   -   3/4 HP Motor, 115 Volts AC, 60 Hz, 1 Phase, 3450 RPM, Unused,
$89.50 each
   
 
click to view full size image LM15635   -   "Ultimate Hostile Duty" Motor by Lincoln Motors. 230/460VAC 60Hz, 3 phase, 3HP, 1760RPM, 8.4 amps at 230V, 4.2 amps at 460V. FR182T style frame. 1.125" Diameter shaft. 13x11.5x11.5, Around 90 lbs sh. Unused,
$225.00 each
   
 
click to view full size image 44450   -   A.O. Smith AC Motor 1725 RPM 1/2 HP 115/230 VAC 60 Hz Single Phase input, 8.7/4.3 Amps. Shaft 2"Lx5/8"dia with keyway. O/a 11x8x8.5, 14 lbs sh. (C5H) Unused,
$175.00 each
   
 
click to view full size image 17749-00   -   Ametek Shop Vac Motor. This is the very high speed motor used in some shop vacuums or vacuum cleaner. Unit as pictured, motor only with small cooling blades. Shaft approx .5 inch long, 5/16 diameter. 5.3x4.6x4.6, 5 lbs sh. Some rust, but (I9S) Unused,
$14.95 each

3 / $26.00
   
 
click to view full size image ECCI-35E200   -   BODINE AC GEARHEAD MOTOR 200 RPM 1/7 HP 35 in/lb torque, counter-clockwise rotation; 115 VAC 60 Hz input. Shaft 1.3"Lx5/8"dia w/ 3/16" square key. O/a 8.5"Lx5.6" dia; 14 lbs sh. (E8M) Used,
$37.95 each
   
 
click to view full size image MOL-2460   -   240 RPM 115 V 60 Hz GEAR MOTOR for intermittent use; starts @ 32 V approx 200 RPM. Increased volts increases torque. Gearhead extends 2.8" beyond motor; 1.1"Lx1/4" dia shaft. Motor 2.8x2.8x2.4 + 5/8"x3/16" dia shaft for fan on rear, 3 lbs sh. Unused,
$7.95 each
   
 
click to view full size image 5KCP39EGH210   -   * GENERAL ELECTRIC REVERSIBLE FAN MOTOR, W/CAP. Ball-bearing 115 VAC 60 Hz 1 amp 225 RPM motor. Use with fan blades unless cooled by other means. Has mount flanges and 5 mf capacitor; 4.5"Lx5.5" dia + 1.5"Lx5/8" dia hollow shaft, 11 lbs sh. (I8G) Unused,
$14.00 each

3 / $23.00
   
 
GM4-AM-MO   -   GM-4 MOTOR ASSEMBLY, geared motor in frame with shaft between 3.5" dia sprockets, 3.5" apart. Motor rated 24 V 400 Hz but can operate from 24 V 60 Hz @ 20 RPM when used with 4 mf capacitor. Higher capacitance increases speed & torque. Stainless steel frame is removable; 7.3x5.3x2.8, 10 lb Used,
$9.95 each


   
 
click to view full size image 4413-1TF   -   * SPRING SPECIAL 3 Phase Motor Controller creates a DC voltage then constructs a 3 phase voltage to run the washing machine motor. The motor will do different things depending on the position of the 4 programming switches. The controller was used to operate washing machine motors, model 5KMC145YTA004S (120V 6.1 LRA 3 phase). We will supply a schematic of a manual controller. We only have the controller as pictured for sale. (D2K)
$12.00 each


   
 
click to view full size image AC-DC-H02   -   115 V AC-DC MOTOR, starts at 25 VDC, runs CW approx 7000 RPM 1/8 HP. 2.3x3x4.5 + 1.5'Lx0.4" dia spiraled shaft; 3 lbs sh. (I8J)
$5.00 each


DC MOTORS



   
 
click to view full size image SR-215   -   26 VDC Reversible motor with clutch for fast stops; 12K RPM @ 26 VDC, 1,2 amps. Clutch engages at 10 VDC which allows variable speed over 10-26 VDC. Rated for intermittent Duty. Spline 3/16" dia shaft; o/a 4x1.25 dia, 1 lbs. (I8H) Unused.
$9.99 each
   
 
click to view full size image 43A159   -   Globe Industries 27.5 VDC, GEARCASE-MOTOR, 33.000 SINGLE REVOLUTIONS PER MINUTE, we measured approximately 10 RPM at 12 VDC. Solder terminals. 1" Dia. 3.5" long. Used.
$20.00 each
   
 
click to view full size image 2643-2   -   American Electronics, INC. 27.5 VDC, 1" Dia. 3.25" long, 3/16" shaft with roll pin. We measured approximately 10 RPM at 10VDC. Used.
$20.00 each
   
 
click to view full size image 500-6-12   -   ROWE 6-12 VDC gear motor. 40-75 RPM; Good for small scale animation projects. Draws approximately 250 MA loaded. Shaft 3/8"Lx1.8"Dia with flat side. 2.5"Lx1.4" Dia. 1 lbs shipping. Unused.
$9.99 each
   
 
click to view full size image GM-8712   -   Pittman DC Gear Reduction Motor 12VDC, 19.5:1 reduction ratio, 128RPM No Load, Used
$19.99 each
   
 
click to view full size image COPAL-24   -   Copal 24VDC Mini Motor 3/32" diameter shaft
$5.00 each
   
 
click to view full size image Actuator-200-LH   -   12 Vdc Gear reduction actuator 120 RPM, 1" travel takes approx three seconds to travel the length of the actuator. Removed from unused equipment. (O1Z) 3 Lbs shipping.
$20.00 each
   
 
click to view full size image Actuator-200-RH   -   12 Vdc Gear reduction actuator 120 RPM, 1" travel takes approx three seconds to travel the length of the actuator. Removed from unused equipment. (O1Z) 3 Lbs shipping.
$20.00 each
   
 
click to view full size image Actuator-200-FB   -   Feed back control for Actuator-200 (O1Z)
$5.00 each
   
 
click to view full size image 317A109-3   -   TRW INC. GLOBE IND DIV 12 VDC MOTOR, 500 RPM Beveled Gear on 5/16 shaft 3 3/4"L x 1 1/4" dia. (Q1Z) Used, 2 Lbs shipping
$20.00 each
   
 
click to view full size image 77671273   -   Product Markings: 13.65.36 MPI, Buehler Products, Inc. 12Vdc 500 RPM with Tachometer leads on front of motor. 3/16 shaft with belt drive pulley, 2 1/4 L X 1 3/8 Dia. (P1Z) Used 1 Lb Shipping
$7.95 each
   
 
click to view full size image 5A2871   -   6 to 24VDC Gear Motor Globe. Rated at 54 RPM at 24VDC; 23 RPM at 12VDC; and 11 RPM at 6VDC. Originally designed for 24VDC. Removed from the AM-3349 amplifier. 1/4" diameter shaft x 3/8" long. O/A 4.2x2x1.6, 3 lbs sh. (P1Z) Used,
$25.95 each
   
 
click to view full size image AST-GK26   -   DC MOTOR, operators over 10-15 VDC 100 ma 2375-2425 RPM with governor. Shaft 5/16"L x 1/16" dia; o/a 2 7/8 x 1 1/8.
$12.00 each
   
 
click to view full size image C5A1054   -   24-29VDC Gearmotor by Globe Industries. No load ratings 60 RPM and 0.5 amp. Has removable cam on shaft. 1/4" diameter shaft. 5x1.5x1.5, 2 lbs sh. Used,
$21.00 each
   
 
click to view full size image 2960031   -   MULTI-SPEED 24 VDC PM MOTOR can be wired for 11500 RPM 0.012 HP 0.7 amp or 3000 RPM 0.033 HP 2.3 amp operation; motor starts to turn at 9 VDC and is reversible. 6"x2.3" dia with 3.6" dia collar; geared shaft 0.6x0.4" dia. 3 lbs sh. Made by Sperry. Used,
$12.95 each
   
 
click to view full size image DH-4000-AD1   -   24VDC PM Motor, will run from 6 to 30VDC at approximately 200 RPM per 6V. 5/8" diameter shaft is 2"L one end, 5/8"L on other. 10"L x 3 7/8" Dia., 16 lbs. Used,
$56.00 each
   
 
click to view full size image R-118-100-PM-0212   -   Permanent Magnet Motor, Revere Camera Company, 27.5 Vdc intermittent 15,000 RPM .8 Amps. 3/16 splined shaft, 2 1/4" L X 1 1/4" Dia. (O1Z) Used 1 Lbs shipping
$10.00 each
   
 
click to view full size image 230-0303-000   -   permenent magnet, DC motor, Indiana General Corp PN 0905-27. 27.5 Vdc, .2 Amps, , 1/8" splined shaft with 13 teeth, 1.687" L X .875" Dia. Torque is 0.2 inch ounces, 11,500 - 13,000 RPM. (O1Z) Removed from surplus equipment.
$10.00 each
   
 
click to view full size image MT-07218   -   Powerful 26 Vdc Motor 2,000 Rpm's, 1/4 " Splined Shaft, 1 1/4" L X 1" Squared, removed from Collins Amp, used in many Collins units, (O1Z) used, 1 Lbs Shipping
$15.00 each
   
 
click to view full size image A7155   -   27VDC 2.4 Amp 3600RPM 1/30 HP Motor by Delco. 6.5x2.9x3, 1/4" diameter shaft. 6 lbs sh. (H7M) Unused,
$6.95 each
   
 
C2BP1A   -   JOHN OSTER MOTOR, 27 VDC 1/100 HP 7000 RPM. 3"Lx2" dia + 1"L x 1/4" dia shaft; 2 lbs sh. Unused,
$6.00 each


   
 
click to view full size image C-25A686   -   GLOBE 27 VDC 1/100 HP MOTORS, 2.5" length X 1.3" diameter. 11000 RPM, p/o ARC-45, Used,
$12.00 each
   
 
click to view full size image C-25A-510   -   Globe Industries D.C. Motor 27.5 Volts, .6 Amps, 1/100 HP at 15,000 RPM, 1/8" shaft with 3/8" gear, 2 5/8" L X 1 3/8" Dia, removed from Collins equipment, (O1Z) used, 1 Lb shipping
$10.00 each
   
 
click to view full size image C-25A-512   -   Globe Industries D.C. Motor 27.5 Volts, .6 Amps, 1/100 HP at 15,000 RPM, removed from Collins equipment, used, 1 Lb shipping
$10.00 each
   
 
click to view full size image 20M34C1   -   15 degree 4-PHASE VR STEP SERVO, 5 ohms 1.5 A/ ; 28 VDC input pulse 3/4x 1/4" dia shaft; o/a 3x3 1/4x3, 2 lbs. sh. Made in Canada; removed from equipment.
$14.00 each
   
 
click to view full size image BL-2-IS   -   28VDC 1.1 Amp Motor by John Oster Mfg . 12000 RPM. 1 oz. in. torque. 3/16" diameter shaft. o/a 4.8x2.3x3.3, 3 lbs sh. Used,
$11.00 each

3 / $29.00
   
 
click to view full size image ALC-1000   -   NORTHFIELD ELECTRIC or HAMILTON BEACH, 28.5VDC, 5800 RPM motor. 4 amp with 1/15 HP. 1/4" dia shaft with removeable gear x 1/2" long. o/a 4" x 2.3", 3 lbs sh., Used,
$16.95 each
   
 
AWC-1000   -   NORTHFIELD ELECTRIC or HAMILTON BEACH, 28.5VDC, 3000 RPM motor. 3.1 amp with 1/33 HP. 1/4" dia shaft with removeable gear x 1/2" long. o/a 4" x 2.3", 3 lbs sh., Used,
$14.00 each
   
 
RBM-2-62   -   * 15 DEGREE STEPPER MOTOR from printer; requires +9 to +40 VDC. High speed and performance w/ driver circuit info. 1x1.3" dia shaft; o/a 5.8"x1.6" dia, 2 lbs. 2 ohm field,
$18.00 each
   
 
RBM-4-62   -   * 15 DEGREE STEPPER MOTOR from printer; requires +9 to +40 VDC. High speed and performance w/ driver circuit info. 1x1.3" dia shaft; o/a 5.8"x1.6" dia, 2 lbs. 4 ohm field,
$21.00 each
   
 
click to view full size image RBM-6-62   -   * 15 DEGREE STEPPER MOTOR from printer; requires +9 to +40 VDC. High speed and performance w/ driver circuit info. 1x1.3" dia shaft; o/a 5.8"x1.6" dia, 2 lbs. 5.8 ohm field,
$23.00 each
   
 
click to view full size image 22254200   -   MAGNETEK VARIABLE SPEED 3/4 HP PM DC MOTOR. 90 VDC 10 Amps 3450 RPM. 11.3 x 4.9 dia. 5/8" diameter shaft. 22 lb sh. (E2T) Unused,
$170.00 each


The motors listed below are ideal for robotics and/or wind generators.

  PART # Volts Amps HP RPM Size Shaft LBS MFG PRICE
   
 
click to view full size image B18594   -   BB MOTOR DC Motor ideal for robotics and/or wind generators. 90VDC, 5.35 ADC, 1/2 HP, 1725 RPM, 13"X6.6"X6.6", 5/8"X1.9" Shaft, 22 LBS. (R1L) Used.
$110.00 each
   
 
click to view full size image GT-13-6179   -   GRAHAM DC Motor ideal for robotics and/or wind generators. 90VDC, 7.5 ADC, 3/4 HP, 1725 RPM, 11.8"X5.7"X5.7", 5/8"X1.9" Shaft, 34 LBS. (R1L) Used.
$125.00 each
   
 
click to view full size image SR3640-1203-56B   -   APPLIED DC Motor ideal for robotics and/or wind generators. 90VDC, 8.8 ADC, 1 HP, 1800 RPM, 15"X6"X6.5", 5/8"X1.9" Shaft, 29 LBS. (R1L) Used.
$160.00 each
   
 
click to view full size image 6008-37   -   GRAHAM DC Motor ideal for robotics and/or wind generators. 90VDC, 4.7 ADC, 1/2 HP, 1725 RPM, 131"X6.5"X6.5", 9/16"X1.9" Shaft, 27 LBS. 5 Available.(R1L) Used.
$105.00 each
   
 
click to view full size image Honeywell-90   -   Honeywell DC Motor ideal for robotics and/or wind generators. 90VDC, unknown ADC, unknown HP, unknown RPM, 16"X6.5"X6.5", 9/16"X1.9" Shaft, 34 LBS. 1 Available.(R1L) Used.
$75.00 each
<< Prev      Currently viewing page 1 of 1      Next >>
Page: 1



Home Products Email us for Catalog or Inquiries Order Form Terms & Conditions Shipping Rates


Any problems with the website? Email webmaster@fairradio.com