View Cart / Checkout
0 items in your cart
Your total is $0.00
Home Products Email us for Catalog or Inquiries Order Form Terms & Conditions Shipping Rates

Search our site:



Inductors and Coils

<< Prev      Currently viewing page 1 of 1      Next >>
Page: 1


   
 
click to view full size image IND10-40   -   10UHy 40 Amp Silver Plated Inductor, 7" coil by 7" long, 9 turns 1/2" spacing between turns, 1/2" dia tubing. (R1W,E8J) Used.
$75.00 each


   
 
click to view full size image TF5QX09ZZ   -   Inductor choke measure 4 Henries on the DigiBridge 3/4"x3/4"x3/8" (S1W) NOS
$2.00 each
   
 
L-RF400   -   400UHy RF choke axial lead,
$1.55 each

5 / $6.50
   
 
click to view full size image 403-4   -   TELEPHONE PICK UP COIL used in modem coupler; 650 MH. 5/8x1 1.8" dia, (M2E) Unused.
$1.50 each
   
 
click to view full size image T53-6032   -   RF MASTER OSCILLATOR COILS, p/o T-22/ARC-5 7-9 MHz xmitter; (R1W)
$7.50 each
   
 
click to view full size image C-447   -   Coil for BC-610 WW2 transmitter output inductor. 4.5"L x 4.5" dia; 3 lbs sh. (G3U) Unused,
$17.00 each
   
 
click to view full size image NV243   -   123-177 mH FERRITE POT CORE INDUCTORS, PC mount; 7/8x 3/4" dia. (S1W) Unused,
$2.50 each


   
 
click to view full size image 80063   -   Small Inductor , 1.5 mH, 1 ADC, 5V, 12KHz, .5 ohm DCR, PC mount. (T1W)
$2.65 each

3 / $7.00


   
 
click to view full size image L401-180L   -   Ribbon Inductor from 180L3 Antenna Coupler, with motor drive; two 5.4"L x 3.4" diameter coils with 288" of drawn silver ribbon (0.125"W x 0.01" Th) wound between; approx 28 uh. Ribbon transferred from coil to coil by 28 VDC motor. P/O Collins 180L3 antenna tuner. O/A 9.3x5.8x5.8, 12 lbs sh. (S1W) Used,
$59.50 each
   
 
click to view full size image L5-ARC-58   -   L5 ROLLER INDUCTOR, part of input tune of ARC-58; 26 turns #18 silvered wire 2"Lx1.1" dia coil: 8.4 uH max. 115 V 400 Hz motor drive ; runs on 26 V 60 Hz. Run only intermittently at reduced speed. Adaptable to direct-drive. O/a 6x3x4.75, 3 lbs. sh. (C4H) Used,
$18.00 each
   
 
L22-PRC-47   -   * 22 uH ROLLER INDUCTOR KITS, includes 4.4"L x 1.5" dia ceramic coil with 40 turns #14 silvered-wire, roller wheel, guide shaft & springs. 3/8" dia shafts have removeable pinned gear. End support plates not supplied; 3 lbs sh.
$18.00 each
   
 
click to view full size image L35-PRC47   -   * 35 uHROLLER INDUCTOR KIT, includes 4.4"L x 1.5" dia ceramic coil with 40 turns #14 silvered-wire, roller wheel, guide shaft & springs. 3/8" dia shafts have removeable pinned gear. End support plates not supplied; 3 lbs sh.
$20.00 each
   
 
L40-PRC47   -   * 40 uH ROLLER INDUCTOR KIT, includes 4.4"L x 1.5" dia ceramic coil with 40 turns #14 silvered-wire, roller wheel, guide shaft & springs. 3/8" dia shafts have removeable pinned gear. End support plates not supplied; 3 lbs sh.
$20.00 each
   
 
click to view full size image T301-CU-991   -   * ROLLER INDUCTOR ASSEMBLY with 115 VAC 400 Hz motor drive, 3.4" lg x 1.75 dia coil; 28 turns #18 wire approx 14 uH with center tap. Designed to resonate antenna to a transceiver's frequency. 4.5x2.8x3.8, 5 lbs; (Q2Y) Used,
$10.00 each
   
 
click to view full size image 3349-02   -   ANTENNA LOAD ASSEMBLY from AM-3349/GRC-106, includes C26 1000pf at 5KV vacuum variable capacitor, C27 15-355pf air capacitor, 26 1000pf feed-thru caps, L1 0.5 to 40UH variable inductor, L2 37UH fixed inductor, S1 2-deck 5-position ceramic switch and two Globe or = 24 VDC motors. Cutting of plastic supports required for parts recovery. 5.5x9.5x5.5, 10 lbs sh. Used,
$325.00 each


   
 
click to view full size image CF-1   -   Small Ceramic Coil Form to constuct a RF inductor, consists of 10 grooves in a 0.5" space. o/a 1.7"Hx1"dia
$3.00 each
   
 
click to view full size image CF-3   -   3 pin Plastic Coil Form to constuct a RF inductor, which fits BC-611. o/a 0.9" dia. x 1.9"H,
2 / $1.50
   
 
click to view full size image CF-3-SKT   -   Socket that mates to the CF-3 Coil Form.
$2.00 each
   
 
click to view full size image CF-5   -   Small Ceramic Coil Form to construct a RF inductor. Consists of 35 grooves in a 1.7" space. o/a 3.1"Hx1.1"dia
$4.50 each
   
 
click to view full size image CF-6   -   Small Ceramic Coil Form to construct a RF inductor. Consists of 11 grooves per inch, 15 grooves total. 1.75"H.X.80"dia. (R1Z)
$3.00 each
   
 
click to view full size image IND-K1   -   Coil Form Assortment has: porcelain inductor core 1 7/8" tall 1 1/8" base has 4 mounting holes. The winding core has 41 grooves for wire 10 holes on flat edge. 3 small porcelain cores with 3 wire grooves. The base has a 6/32 threaded hole.
$4.00 each
   
 
click to view full size image PLLBTL   -   Plastic Pill Bottle 2" long by 3/4" Dia. with cap. Good for homebrew coil form. Unused.
$0.75 each

10 / $5.00


   
 
click to view full size image RFT-600   -   RF Transformer, Pull out of SP-600 Receiver 7-14MHz Oscillator. 2.1x1.9x1.3, 1 lb sh. (T1W) Unused,
$7.50 each


   
 
click to view full size image 545T001   -   Mallory Inducto Tuners, no actual data, but I put a coil loop and 100pf capacitor across the coil and used a dip meter to determing the resonant frequency. All dipped in approx the 40 - 60 mhz range. Mallory made most of these for early VHF television sets that had variable tuning, no detents. 4 section inducto tuner, 5.5 turns, 40-60mhz, 4.3 x 1.8 x 1.6, 0.5" long x 0.25" dia shaft. (T1V) Unused Sh Wt 3 lbs,
$14.50 each


   
 
click to view full size image 458U246   -   Mallory Inducto Tuners, no actual data, but I put a coil loop and 100pf capacitor across the coil and used a dip meter to determing the resonant frequency. All dipped in approx the 40 - 60 mhz range. Mallory made most of these for early VHF television sets that had variable tuning, no detents. 7.5 turns, 41-67 mhz, 7.1 x 2.25 x 2.1, 2.4" long x 0.25" dia shaft. (T1V) Unused Sh Wt 3 lbs,
$16.50 each
   
 
click to view full size image 456C452   -   Mallory Inducto Tuners, no actual data, but I put a coil loop and 100pf capacitor across the coil and used a dip meter to determing the resonant frequency. All dipped in approx the 40 - 60 mhz range. Mallory made most of these for early VHF television sets that had variable tuning, no detents. 5.5 turns 44 - 65 mhz 7.1 x 2.25 x 2.1 inches 2.4" long x 0.25" dia shaft. (T1V) Unused Sh Wt 3 lbs,
$14.00 each




PI Wound


  PART # L x Dia uHy I - ma PRICE
    
 
P3PE-500 .50x.30 500 50 $5.00 each
5 / $20.00
10 / $30.00
    
 
P2PE-675 .75x.45 675 200 $5.00 each
5 / $20.00
10 / $30.00
    
 
P3FS-5800 .90x.50 5800 200 $3.00 each
5 / $10.00
10 / $15.00
    
 
P3FE-12000 1.00x.42 12000 200 $5.00 each
5 / $20.00
10 / $30.00




Multi Layer Enamel


  PART # L x Dia uHy I - ma PRICE
    
 
MPE-55 .40x.25 55 125 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MPE-65 .30x.20 65 125 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MPE-70 .30x.20 70 125 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MFE-75 .30x.20 75 125 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MPE-85 .30x.20 85 125 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MPE-107 .30x.20 107 50 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MFE-110 .30x.15 110 50 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MFE-122 .38x.25 122 125 $2.00 each
5 / $6.00
10 / $10.00
    
 
MPE-135 .40x.55 135 300 $2.00 each
5 / $8.00
10 / $14.00
100 / $80.00
    
 
MFE-135 .30x.18 135 50 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MPE-138 .30x.20 138 125 $2.00 each
5 / $6.00
10 / $10.00
    
 
MFE-150 .30x.18 150 50 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MFE-178 .30x.22 178 125 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MFE-200 .30x.20 200 125 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MPE-218 .30x.22 218 125 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MFE-100-30-260 1.00x.30 260 500 $2.00 each
5 / $8.00
10 / $14.00
    
 
MFE-30-25-260 .30x.25 260 50 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MPE-266 .30x.30 266 50 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MFE-300 .30x.25 300 50 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MPE-340 .30x.30 340 100 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MFE-360 .30x.20 360 100 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MPE-362 .30x.27 362 100 $2.00 each
5 / $6.00
    
 
MFE-375 .30x.25 375 100 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MPE-390 .30x.30 390 100 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MFE-400 .75x.35 400 500 $3.00 each
5 / $10.00
10 / $15.00
    
 
MFE-435 .30x.25 435 50 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MPE-550 .30x.30 550 50 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MFE-680 .38x.30 680 50 $2.00 each
5 / $6.00
10 / $10.00
    
 
MPE-685 .30x.40 685 50 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MFE-100-40-715 1.00x.40 715 500 $2.00 each
5 / $8.00
10 / $14.00
    
 
MFE-30-12-715 .30x.12 715 30 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MPE-785 .30x.32 785 50 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MPE-820 .30x.40 820 50 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MFE-3000 .30x.20 3000 30 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MFE-4300 .40x.20 4300 50 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MFE-6250 .30x.42 6250 75 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MFE-7950 .40x.30 7950 30 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00
    
 
MPE-11500 .50x.40 11500 30 $2.00 each
5 / $6.00
10 / $10.00
100 / $60.00




Multi Layer Coating


  PART # L x Dia uHy I - ma PRICE
    
 
MPC-90 .30x.28 90 30 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MFC-95 .25x.12 95 30 $2.00 each
5 / $5.00
10 / $7.50
    
 
MPC-110 .30x.25 110 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MFC-135 .30x.19 135 30 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MPC-145 .30x.22 145 30 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MFC-155 .30x.19 155 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MPC-25-30-180 .25x.30 180 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MPC-30-30-180 .30x.30 180 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MFC-195 .30x.18 195 30 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MPC-200 .30x.25 200 75 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MFC-205 .30x.20 205 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MPC-225 .30x.30 225 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MFC-260 .30x.25 260 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MFC-265 .30x.30 265 50 $2.00 each
5 / $5.00
10 / $7.50
    
 
MPC-266 .30x.30 266 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MPC-30-30-300 .30x.30 300 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MPC-30-22-300 .30x.22 300 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MPC-325 .30x.30 325 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MFC-355 .30x.22 355 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MFC-425 .50x.40 425 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MPC-510 .30x.30 510 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MFC-590 .30x.28 590 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MFC-625 .30x.35 625 50 $2.00 each
5 / $5.00
10 / $7.50
    
 
MPC-835 .30x.40 835 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MPC-1200 .35x.32 1200 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MPC-38-32-1400 .38x.32 1400 50 $2.00 each
5 / $5.00
10 / $7.50
    
 
MPC-32-32-1400 .32x.32 1400 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MPC-1530 .35x.32 1530 50 $2.00 each
5 / $5.00
10 / $7.50
    
 
MPC-1650 .40x.35 1650 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MPC-1660 .35x.30 1660 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MFC-7900 .40x.28 7900 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MFC-8450 .40x.48 8450 50 $2.00 each
5 / $5.00
10 / $7.50
    
 
MFC-10300 .50x.40 10300 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MFC-16900 .50x.40 16900 50 $2.00 each
5 / $5.00
10 / $7.50
    
 
MFC-21000 .65x.41 21000 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MFC-23000 .50x.50 23000 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
MFC-26000 .65x.45 26000 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00




Multi Layer Shrink


  PART # L x Dia uHy I - ma PRICE
    
 
MFS-59 .70x.40 59 300 $3.00 each
5 / $10.00
10 / $15.00
    
 
MFS-100 1.00x.40 100 800 $3.00 each
5 / $10.00
10 / $15.00
    
 
MFS-110 1.25x.45 110 1200 $3.00 each
5 / $10.00
10 / $15.00
    
 
MFS-115 1.50x.60 115 2000 $3.00 each
5 / $10.00
10 / $15.00
    
 
MFS-170 .75x.40 170 800 $3.00 each
5 / $10.00
10 / $15.00
    
 
MFS-520 .75x.40 520 300 $3.00 each
5 / $10.00
10 / $15.00
100 / $100.00
    
 
MFS-750 .50x.22 750 200 $3.00 each
5 / $10.00
10 / $15.00
100 / $100.00
    
 
MFS-1110 .75x.40 1110 300 $3.00 each
5 / $10.00
10 / $15.00
100 / $100.00
    
 
MFS-1125 1.20x.30 1125 200 $3.00 each
5 / $10.00
10 / $15.00
100 / $100.00
    
 
MFS-4300 .78x.70 4300 200 $3.00 each
5 / $10.00
10 / $15.00
    
 
MFS-13000 .75x.50 13000 125 $3.00 each
5 / $10.00
10 / $15.00
100 / $100.00
    
 
MFS-17500 .75x.50 17500 125 $3.00 each
5 / $10.00
10 / $15.00
    
 
MFS-39200 .75x.45 39200 125 $3.00 each
5 / $10.00
10 / $15.00




Single Layer Enamel


  PART # L x Dia uHy I - ma PRICE
    
 
SPE-4 .65x.22 4 2000 $2.00 each
5 / $8.00
10 / $14.00
    
 
SPE-4.5 .62x.20 4.5 800 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SFE-33-10-5.5 .33x.10 5.5 200 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SFE-20-23-5.5 .23x.10 5.5 200 $2.00 each
5 / $5.00
10 / $7.50
    
 
SPE-30-14-5.5 .30x.14 5.5 200 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SPE-50-17-5.5 .50x.17 5.5 300 $2.00 each
5 / $5.00
10 / $7.50
    
 
SPE-62-20-5.5 .62x.20 5.5 300 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SPE-30-10-6 .30x.10 6 200 $2.00 each
5 / $5.00
10 / $7.50
    
 
SFE-75-22-6 .75x.22 6 800 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SFE-78-30-6 .78x.30 6 500 $2.00 each
5 / $5.00
10 / $7.50
    
 
SPE-25-10-6.5 .25x.10 6.5 200 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SPE-30-15-6.5 .30x.15 6.5 200 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SPE-62-18-6.5 .62x.18 6.5 300 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SPE-25-12-7.5 .25x.12 7.5 200 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SPE-75-20-7.5 .75x.20 7.5 300 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SPE-10 .35x.11 10 200 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SPE-42-10-11 .42x.10 11 200 $2.00 each
5 / $5.00
10 / $7.50
    
 
SPE-50-13-11 .50x.13 11 200 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SPE-11.5 .35x.15 11.5 200 $2.00 each
5 / $5.00
10 / $7.50
    
 
SPE-41-12-12.5 .41x.12 12.5 200 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SPE-30-10-12.5 .30x.10 12.5 30 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SPE-18 .57x.20 18 200 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SPE-50-17-23 .50x.17 23 80 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SPE-75-19-23 .75x.19 23 200 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SFE-25 .75x.21 25 200 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SPE-27 .30x.10 27 30 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SFE-36 .88x.22 36 300 $2.00 each
5 / $5.00
10 / $7.50
    
 
SPE-39 .75x.21 39 300 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SPE-44 .75x.21 44 300 $2.00 each
5 / $5.00
10 / $7.50
    
 
SPE-45 .50x.13 45 80 $2.00 each
5 / $5.00
10 / $7.50
    
 
SPE-58 .50x.13 58 80 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SPE-75 .50x.15 75 30 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SPE-77 .50x.15 77 30 $2.00 each
5 / $5.00
10 / $7.50
    
 
SFE-78 .75x.40 78 800 $3.00 each
5 / $10.00
10 / $15.00
    
 
SPE-80 .75x.20 80 150 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SFE-95 .85x.25 95 200 $2.00 each
5 / $5.00
10 / $7.50
    
 
SFE-97 .50x.18 97 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SFE-116 .73x.38 116 800 $2.00 each
5 / $6.00
10 / $10.00
    
 
SPE-148 .40x.15 148 30 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SFE-170 .50x.13 170 125 $2.00 each
5 / $6.00
10 / $10.00
    
 
SPE-185 1.25x.35 185 200 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SFE-188 .42x.11 188 30 $2.00 each
5 / $5.00
10 / $7.50
    
 
SPE-188 .50x.13 188 30 $2.00 each
5 / $5.00
10 / $7.50




Single Layer Coating


  PART # L x Dia uHy I - ma PRICE
    
 
SPC-5.5 .25x.12 5.5 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SFC-15 .32x.10 15 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SFC-16 .30x.12 16 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SPC-30 .50x.25 30 150 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SFC-33 .30x.10 33 30 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SFC-50 .25x.10 50 30 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SFC-52 .25x.10 52 30 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SPC-60 .38x.15 60 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SPC-62 .30x.20 62 50 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SPC-90 .25x.10 90 30 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00




Single Layer Shrink



  PART # L x Dia uHy I - ma PRICE
    
 
SFS-7.5 .50x.20 7.5 500 $2.00 each
5 / $5.00
10 / $7.50
    
 
SFS-42 .50x.20 42 200 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SFS-77 .50x.20 77 300 $3.00 each
5 / $10.00
10 / $15.00
100 / $100.00
    
 
SFS-118 .50x.20 118 300 $3.00 each
5 / $10.00
10 / $15.00
    
 
SFS-430 .75x.22 430 200 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00
    
 
SFS-737 .75x.40 737 300 $2.00 each
5 / $5.00
10 / $7.50
100 / $50.00




Wide Band Chokes

  PART # L x Dia Turns Z@50MHz Z@100MHz PRICE
    
 
FB1113 .43x.26 2.5 850 725 $2.00 each
5 / $3.00
10 / $5.00
100 / $30.00
    
 
FB1114 .43x.26 3 1000 750 $2.00 each
5 / $3.00
10 / $5.00
100 / $30.00
    
 
FB1115 .43x.26 4.5 Not Rated 670 $2.00 each
5 / $3.00
10 / $5.00
100 / $30.00




Torroid Style

  PART # L x Dia uHy I - ma PRICE
    
 
TORR-33 .70x.35x.25 33 800 $1.00 each
5 / $4.50
10 / $7.50
    
 
TORR-48 .55x.30x.18 48 800 $1.00 each
5 / $4.50
10 / $7.50
    
 
TORR-59 .55x.30x.18 59 800 $1.00 each
5 / $4.50
10 / $7.50
    
 
TORR-65 .55x.30x.18 65 800 $1.00 each
5 / $4.50
10 / $7.50
    
 
TORR-76 .60x.38x.15 76-76 1200 $1.00 each
5 / $4.50
10 / $7.50
    
 
TORR-1800 .65x.35x.20 1800 300 $1.00 each
5 / $4.50
10 / $7.50
   
 
click to view full size image 12388A   -   Molded Torriod 100 MH 1" Dia.(K1S) Unused.
$6.50 each
   
 
click to view full size image A-303163-2-ZZ4   -   Outer Diameter 1 1/4", Inner Diameter 3/4", Thickness 3/16", Blue,
$2.75 each
   
 
click to view full size image K49-55548-ZZ4   -   Outer Diameter 1 1/4", Inner Diameter, 3/4", Thickness 3/8", Grey,
$2.75 each
   
 
click to view full size image RZ218F-ZZ4   -   Outer Diameter 1 1/4", Inner Diameter, 3/4", Thickness 3/8", Green, (K1S)
$2.00 each
   
 
click to view full size image 4080-0015-ZZ4   -   Outer Diameter 1 1/2", Inner Diameter, 7/16", Thickness 9/16", Red. Wire approx 18 ga. Inductance approx 0.260Mhy. Unused.
$2.50 each

5 / $10.00


Notice: TRANSFORMER & CHOKE STOCKS ARE LIMITED. Please provide 2nd choice or accepatble rating range!

                          

Style: A                        Style: B                          Style: C


  PART # Rating Size Style WT PRICE
    
 
103-1.5MH-11A 1.5 mHY/3 mHY 11A/1A, swinging 6.8v - 120cps .07 ohm 2x2.3x3 A 4 $14.00 each
    
 
158Q
click to view full size image
5Hy 150ma, 105 ohm, 400VDC 2x3.3x2 Hammond Mfg. New, 3 $26.03 each
4 / $88.40
    
 
157M
click to view full size image
8Hy 100ma, 259 ohm, 400VDC 1.8x3.3x2 Hammond Mfg. New, 2 $29.03 each
3 / $75.60
    
 
TF1A04YY 8Hy 128ma, 200 ohm, 505VDC 2.2x2.3x3.1 Open Frame Epoxy Coated (Q2E,TS-102) 3 $18.00 each
    
 
158M
click to view full size image
10Hy 100ma, 262 ohm, 400VDC 2x3.3x2 Hammond Mfg. New, 3 $25.72 each
4 / $87.48
    
 
159M
click to view full size image
15Hy 100ma, 256 ohm, 500VDC 2.3x4.1x2.7 Hammond Mfg. New, 4 $33.00 each
3 / $84.57
    
 
193C
click to view full size image
20Hy 100ma, 181 ohms, 600VDC 3.3x2.5x3.1 End Bell style. Hammond Mfg. New, 6 $54.78 each
2 / $92.50
4 / $175.00
<< Prev      Currently viewing page 1 of 1      Next >>
Page: 1



Home Products Email us for Catalog or Inquiries Order Form Terms & Conditions Shipping Rates


Any problems with the website? Email webmaster@fairradio.com