|FAA-RELAY - RF Coaxial Transfer Bypass Relay, 24VDC Coil. Has 4 type "N" connectors with gold pins. Around 20 watts. Made for a FAA project. 3.3x3x2, 2 lbs sh. (R1W,N2L)
|11300-75 - Transco SPDT RF relay 82152-11300-75, 28 VDC coil. Connectors are similiar
to type N, but are 75 ohm. The connectors will not mate with type N. Two
operation coils, one is marked "energize to close" and the other is marked
"energize to open". 1 lb sh. Used excellent,
|82152-810C30100 - Transco SPDT Coax Relay, 50 ohms, Frequency: DC - 18GHz, Power: 28 Volt
DC, Three TNC female connectors. Failsafe. Good condition,
|RE-275 - SPDT Coax Relay , operates over 100-400 MHz, 24-28VDC coil. VSWR better than 1.1; cross-talk better than 60DB. Three BNC connections. 2.5x 3.2x1.7, 2 lbs sh. Used,
|300-11266 - AMPHENOL COAX RELAY, response to 12 GHz, 30 watts 27 VDC coil. Input push-on similar to SMA, output oddball screw on and mini-BNC conn; 3.1x1.5 x1.4. Unused,
|RFK6396 - Miniature coaxial SPDT can relay for low level RF switching. Also has SPDT contacts. 26.5 VDC 675 ohms. HI-G d'italia. Removed from a 2 - 30 mhz amplifier but usable to at least 500 mhz. I think the connectors are SMB and SMC.
|RE-612-2 - Similar to the RFK6396, but coax relay is in metal box with 6 very small coax connector (SML ??)
|COAXUHF-ZZ4 - SPDT Coax Relay with Type UHF connections. 400 ohm 24VDC coil.
|D2-313B008 - SPDT Microwave Switch designed for high performance in microwave systems to 12.4 GHz. Has three TNC connections. Requires 24-30VDC. 3x2.70.9, Jay-El Products. used,
|20CSA-ZZ1 - Coaxial RF Bypass Switch with 4 type N female connections. ITT Industries Part # 512983 - 1. The 4 drawings you see were with the switch. (C3Qpo) Used,